Logo Search packages:      
Sourcecode: alsa-driver version File versions

indigodj_dsp.c

// ****************************************************************************
//
//   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
//   All rights reserved
//   www.echoaudio.com
//
//   This file is part of Echo Digital Audio's generic driver library.
//
//   Echo Digital Audio's generic driver library is free software;
//   you can redistribute it and/or modify it under the terms of
//   the GNU General Public License as published by the Free Software Foundation.
//
//   This program is distributed in the hope that it will be useful,
//   but WITHOUT ANY WARRANTY; without even the implied warranty of
//   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//   GNU General Public License for more details.
//
//   You should have received a copy of the GNU General Public License
//   along with this program; if not, write to the Free Software
//   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
//   MA  02111-1307, USA.
//
// ****************************************************************************
//
// Translation from C++ and adaptation for use in ALSA-Driver
// were made by Giuliano Pochini <pochini@shiny.it>
//
// ****************************************************************************


static int set_vmixer_gain(echoaudio_t *chip, u16 output, u16 pipe, int gain);
static int update_vmixer_level(echoaudio_t *chip);


static int init_hw(echoaudio_t *chip, u16 device_id, u16 subdevice_id)
{
      int err;

      DE_INIT(("init_hw() - Indigo DJ\n"));
      snd_assert((subdevice_id & 0xfff0) == INDIGO_DJ, return -ENODEV);

      /* This part is common to all the cards */
      if ((err = init_dsp_comm_page(chip))) {
            DE_INIT(("init_hw - could not initialize DSP comm page\n"));
            return err;
      }

      chip->device_id = device_id;
      chip->subdevice_id = subdevice_id;
      chip->bad_board = TRUE;
      chip->dsp_code_to_load = &card_fw[FW_INDIGO_DJ_DSP];
      /* Since this card has no ASIC, mark it as loaded so everything works OK */
      chip->asic_loaded = TRUE;
      chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;

      /* Load the DSP and the ASIC on the PCI card */
      if ((err = load_firmware(chip)) < 0)
            return err;

      chip->bad_board = FALSE;

      /* Must call this here after DSP is init to init gains and mutes */
      if ((err = init_line_levels(chip)) < 0)
            return err;

      /* Default routing of the virtual channels: vchannels 0-3 and
      vchannels 4-7 are routed to real channels 0-4 */
      set_vmixer_gain(chip, 0, 0, 0);
      set_vmixer_gain(chip, 1, 1, 0);
      set_vmixer_gain(chip, 2, 2, 0);
      set_vmixer_gain(chip, 3, 3, 0);
      set_vmixer_gain(chip, 0, 4, 0);
      set_vmixer_gain(chip, 1, 5, 0);
      set_vmixer_gain(chip, 2, 6, 0);
      set_vmixer_gain(chip, 3, 7, 0);
      update_vmixer_level(chip);

      DE_INIT(("init_hw done\n"));
      return err;
}



static u32 detect_input_clocks(const echoaudio_t *chip)
{
      return ECHO_CLOCK_BIT_INTERNAL;
}



/* The Mia has no ASIC. Just do nothing */
static int load_asic(echoaudio_t *chip)
{
      return 0;
}



/****************************************************************************

      Hardware setup and config

 ****************************************************************************/

//===========================================================================
//
// set_sample_rate
//
// Set the audio sample rate for Indigo DJ (same as the Mia)
//
//===========================================================================

static int set_sample_rate(echoaudio_t *chip, u32 rate)
{
      u32 control_reg;

      switch (rate) {
      case 96000:
            control_reg = MIA_96000;
            break;
      case 88200:
            control_reg = MIA_88200;
            break;
      case 48000:
            control_reg = MIA_48000;
            break;
      case 44100:
            control_reg = MIA_44100;
            break;
      case 32000:
            control_reg = MIA_32000;
            break;
      default:
            DE_ACT(("set_sample_rate: %d invalid!\n", rate));
            return -EINVAL;
      }

      /* Override the clock setting if this Mia is set to S/PDIF clock */
      if (chip->input_clock == ECHO_CLOCK_SPDIF)
            control_reg |= MIA_SPDIF;

      /* Set the control register if it has changed */
      if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
            if (wait_handshake(chip))
                  return -EIO;

            /* Set the values in the comm page */
            chip->comm_page->sample_rate = cpu_to_le32(rate);     /* ignored by the DSP */
            chip->comm_page->control_register = cpu_to_le32(control_reg);
            chip->sample_rate = rate;
            /* Poke the DSP */
            clear_handshake(chip);
            return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
      }
      return 0;
}



/* This function routes the sound from a virtual channel to a real output */
static int set_vmixer_gain(echoaudio_t *chip, u16 output, u16 pipe, int gain)
{
      int index;

      snd_assert(pipe < NUM_PIPES_OUT && output < NUM_BUSSES_OUT, return -EINVAL);

      if (wait_handshake(chip))
            return -EIO;

      chip->vmixer_gain[output][pipe] = gain;
      index = output * NUM_PIPES_OUT + pipe;
      chip->comm_page->vmixer[index] = gain;

      DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
      return 0;
}



/* Tell the DSP to read and update virtual mixer levels in comm page. */
static int update_vmixer_level(echoaudio_t *chip)
{
      if (wait_handshake(chip))
            return -EIO;
      clear_handshake(chip);
      return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
}


Generated by  Doxygen 1.6.0   Back to index