Logo Search packages:      
Sourcecode: alsa-driver version File versions  Download package

gina24_dsp.c

// ****************************************************************************
//
//   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
//   All rights reserved
//   www.echoaudio.com
//
//   This file is part of Echo Digital Audio's generic driver library.
//
//   Echo Digital Audio's generic driver library is free software;
//   you can redistribute it and/or modify it under the terms of
//   the GNU General Public License as published by the Free Software Foundation.
//
//   This program is distributed in the hope that it will be useful,
//   but WITHOUT ANY WARRANTY; without even the implied warranty of
//   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//   GNU General Public License for more details.
//
//   You should have received a copy of the GNU General Public License
//   along with this program; if not, write to the Free Software
//   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
//   MA  02111-1307, USA.
//
// ****************************************************************************
//
// Translation from C++ and adaptation for use in ALSA-Driver
// were made by Giuliano Pochini <pochini@shiny.it>
//
// ****************************************************************************


static int write_control_reg(echoaudio_t *chip, u32 value, char force);
static int set_input_clock(echoaudio_t *chip, u16 clock);
static int set_professional_spdif(echoaudio_t *chip, char prof);
static int set_nominal_level(echoaudio_t *chip, u16 index, char consumer);
static int set_digital_mode(echoaudio_t *chip, u8 mode);
static int load_asic_generic(echoaudio_t *chip, u32 cmd, const struct firmware *asic);
static int check_asic_status(echoaudio_t *chip);


static int init_hw(echoaudio_t *chip, u16 device_id, u16 subdevice_id)
{
      int err;

      DE_INIT(("init_hw() - Gina24\n"));
      snd_assert((subdevice_id & 0xfff0) == GINA24, return -ENODEV);

      /* This part is common to all the cards */
      if ((err = init_dsp_comm_page(chip))) {
            DE_INIT(("init_hw - could not initialize DSP comm page\n"));
            return err;
      }

      chip->device_id = device_id;
      chip->subdevice_id = subdevice_id;
      chip->bad_board = TRUE;
      chip->input_clock_types =     ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
                              ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96 |
                              ECHO_CLOCK_BIT_ADAT;
      chip->professional_spdif = FALSE;
      chip->digital_in_automute = TRUE;
      chip->digital_mode = DIGITAL_MODE_SPDIF_RCA;

      /* Gina24 comes in both '301 and '361 flavors */
      if (chip->device_id == DEVICE_ID_56361) {
            chip->dsp_code_to_load = &card_fw[FW_GINA24_361_DSP];
            chip->digital_modes =   ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
                              ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
                              ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
      } else {
            chip->dsp_code_to_load = &card_fw[FW_GINA24_301_DSP];
            chip->digital_modes =   ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
                              ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
                              ECHOCAPS_HAS_DIGITAL_MODE_ADAT |
                              ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_CDROM;
      }

      /* Load the DSP and the ASIC on the PCI card */
      if ((err = load_firmware(chip)) < 0)
            return err;

      chip->bad_board = FALSE;

      /* Must call this here after DSP is init to init gains and mutes */
      err = init_line_levels(chip);

      /* Set the digital mode to S/PDIF RCA */
      set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);

      /* Set the S/PDIF output format to "professional" */
      err = set_professional_spdif(chip, TRUE);

      DE_INIT(("init_hw done\n"));
      return err;
}



//===========================================================================
//
// detect_input_clocks returns a bitmask consisting of all the input
// clocks currently connected to the hardware; this changes as the user
// connects and disconnects clock inputs.
//
// You should use this information to determine which clocks the user is
// allowed to select.
//
// Gina24 supports S/PDIF, Esync, and ADAT input clocks.
//
//===========================================================================

static u32 detect_input_clocks(const echoaudio_t *chip)
{
      u32 clocks_from_dsp, clock_bits;

      /* Map the DSP clock detect bits to the generic driver clock detect bits */
      clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);

      clock_bits = ECHO_CLOCK_BIT_INTERNAL;

      if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
            clock_bits |= ECHO_CLOCK_BIT_SPDIF;

      if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
            clock_bits |= ECHO_CLOCK_BIT_ADAT;

      if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ESYNC)
            clock_bits |= ECHO_CLOCK_BIT_ESYNC | ECHO_CLOCK_BIT_ESYNC96;

      return clock_bits;
}



/****************************************************************************

  Hardware setup and config

 ****************************************************************************/

//===========================================================================
//
// Gina24 has an ASIC on the PCI card which must be loaded for anything
// interesting to happen.
//
//===========================================================================

static int load_asic(echoaudio_t *chip)
{
      u32 control_reg;
      int err;
      const struct firmware *fw;

      if (chip->asic_loaded)
            return 1;

      /* Give the DSP a few milliseconds to settle down */
      mdelay(10);

      /* Pick the correct ASIC for '301 or '361 Gina24 */
      if (chip->device_id == DEVICE_ID_56361)
            fw = &card_fw[FW_GINA24_361_ASIC];
      else
            fw = &card_fw[FW_GINA24_301_ASIC];

      if ((err = load_asic_generic(chip, DSP_FNC_LOAD_GINA24_ASIC, fw)) < 0)
            return err;

      chip->asic_code = fw;

      /* Now give the new ASIC a little time to set up */
      mdelay(10);
      /* See if it worked */
      err = check_asic_status(chip);

      /* Set up the control register if the load succeeded - 48 kHz, internal clock, S/PDIF RCA mode */
      if (!err) {
            control_reg = GML_CONVERTER_ENABLE | GML_48KHZ;
            err = write_control_reg(chip, control_reg, TRUE);
      }
      DE_INIT(("load_asic() done\n"));
      return err;
}



//===========================================================================
//
// Set the audio sample rate for Gina24
//
//===========================================================================

static int set_sample_rate(echoaudio_t *chip, u32 rate)
{
      u32 control_reg, clock;

      snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT, return -EINVAL);

      /* Only set the clock for internal mode. */
      if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
            DE_ACT(("set_sample_rate: Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"));
            /* Save the rate anyhow */
            chip->comm_page->sample_rate = cpu_to_le32(rate);
            chip->sample_rate = rate;
            return 0;
      }

      /* Set the sample rate */
      clock = 0;

      control_reg = le32_to_cpu(chip->comm_page->control_register);
      control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;

      switch (rate) {
      case 96000:
            clock = GML_96KHZ;
            break;
      case 88200:
            clock = GML_88KHZ;
            break;
      case 48000:
            clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
            break;
      case 44100:
            clock = GML_44KHZ;
            /* Professional mode ? */
            if (control_reg & GML_SPDIF_PRO_MODE)
                  clock |= GML_SPDIF_SAMPLE_RATE0;
            break;
      case 32000:
            clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 | GML_SPDIF_SAMPLE_RATE1;
            break;
      case 22050:
            clock = GML_22KHZ;
            break;
      case 16000:
            clock = GML_16KHZ;
            break;
      case 11025:
            clock = GML_11KHZ;
            break;
      case 8000:
            clock = GML_8KHZ;
            break;
      default:
            DE_ACT(("set_sample_rate: %d invalid!\n", rate));
            return -EINVAL;
      }

      control_reg |= clock;

      chip->comm_page->sample_rate = cpu_to_le32(rate);     /* ignored by the DSP */
      chip->sample_rate = rate;
      DE_ACT(("set_sample_rate: %d clock %d\n", rate, clock));

      return write_control_reg(chip, control_reg, FALSE);
}



//===========================================================================
//
// Set the input clock to internal, S/PDIF, ADAT
//
//===========================================================================

static int set_input_clock(echoaudio_t *chip, u16 clock)
{
      u32 control_reg, clocks_from_dsp;

      DE_ACT(("set_input_clock:\n"));

      /* Mask off the clock select bits */
      control_reg = le32_to_cpu(chip->comm_page->control_register) & GML_CLOCK_CLEAR_MASK;
      clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);

      switch (clock) {
      case ECHO_CLOCK_INTERNAL:
            DE_ACT(("Set Gina24 clock to INTERNAL\n"));
            chip->input_clock = ECHO_CLOCK_INTERNAL;
            return set_sample_rate(chip, chip->sample_rate);
      case ECHO_CLOCK_SPDIF:
            if (chip->digital_mode == DIGITAL_MODE_ADAT)
                  return -EAGAIN;
            DE_ACT(("Set Gina24 clock to SPDIF\n"));
            control_reg |= GML_SPDIF_CLOCK;
            if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF96)
                  control_reg |= GML_DOUBLE_SPEED_MODE;
            else
                  control_reg &= ~GML_DOUBLE_SPEED_MODE;
            break;
      case ECHO_CLOCK_ADAT:
            if (chip->digital_mode != DIGITAL_MODE_ADAT)
                  return -EAGAIN;
            DE_ACT(("Set Gina24 clock to ADAT\n"));
            control_reg |= GML_ADAT_CLOCK;
            control_reg &= ~GML_DOUBLE_SPEED_MODE;
            break;
      case ECHO_CLOCK_ESYNC:
            DE_ACT(("Set Gina24 clock to ESYNC\n"));
            control_reg |= GML_ESYNC_CLOCK;
            control_reg &= ~GML_DOUBLE_SPEED_MODE;
            break;
      case ECHO_CLOCK_ESYNC96:
            DE_ACT(("Set Gina24 clock to ESYNC96\n"));
            control_reg |= GML_ESYNC_CLOCK | GML_DOUBLE_SPEED_MODE;
            break;
      default:
            DE_ACT(("Input clock 0x%x not supported for Gina24\n", clock));
            return -EINVAL;
      }

      chip->input_clock = clock;
      return write_control_reg(chip, control_reg, TRUE);
}



//===========================================================================
//
// set_digital_mode
//
//===========================================================================

static int dsp_set_digital_mode(echoaudio_t *chip, u8 mode)
{
      u32 control_reg;
      int err, incompatible_clock;

      /* Set clock to "internal" if it's not compatible with the new mode */
      incompatible_clock = FALSE;
      switch (mode) {
      case DIGITAL_MODE_SPDIF_OPTICAL:
      case DIGITAL_MODE_SPDIF_CDROM:
      case DIGITAL_MODE_SPDIF_RCA:
            if (chip->input_clock == ECHO_CLOCK_ADAT)
                  incompatible_clock = TRUE;
            break;
      case DIGITAL_MODE_ADAT:
            if (chip->input_clock == ECHO_CLOCK_SPDIF)
                  incompatible_clock = TRUE;
            break;
      default:
            DE_ACT(("Digital mode not supported: %d\n", mode));
            return -EINVAL;
      }

      spin_lock_irq(&chip->lock);

      if (incompatible_clock) {     /* Switch to 48KHz, internal */
            chip->sample_rate = 48000;
            set_input_clock(chip, ECHO_CLOCK_INTERNAL);
      }

      /* Clear the current digital mode */
      control_reg = le32_to_cpu(chip->comm_page->control_register);
      control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;

      /* Tweak the control reg */
      switch (mode) {
      case DIGITAL_MODE_SPDIF_OPTICAL:
            control_reg |= GML_SPDIF_OPTICAL_MODE;
            break;
      case DIGITAL_MODE_SPDIF_CDROM:
            /* '361 Gina24 cards do not have the S/PDIF CD-ROM mode */
            if (chip->device_id == DEVICE_ID_56301)
                  control_reg |= GML_SPDIF_CDROM_MODE;
            break;
      case DIGITAL_MODE_SPDIF_RCA:
            /* GML_SPDIF_OPTICAL_MODE bit cleared */
            break;
      case DIGITAL_MODE_ADAT:
            control_reg |= GML_ADAT_MODE;
            control_reg &= ~GML_DOUBLE_SPEED_MODE;
            break;
      }

      err = write_control_reg(chip, control_reg, TRUE);
      spin_unlock_irq(&chip->lock);
      if (err < 0)
            return err;
      chip->digital_mode = mode;

      DE_ACT(("set_digital_mode to %d\n", chip->digital_mode));
      return incompatible_clock;
}

Generated by  Doxygen 1.6.0   Back to index